1b Static Boom

This one day accredited training course instructs an operator how to prepare and safely use static self-propelled booms. It provides both theory and practical training.

1B Static Boom

The Work at Height Regulations 2005 requires anyone that works at height are to be deemed competent – if someone is not competent, they should not work at height unless supervised by a competent person.

How is someone deemed competent? – training, knowledge and experience.

Our static boom course will correctly train and test you or your staff in the safe use, selection, pre use check, storage, disposal procedures and correct wearing on the harness, pre use check of the equipment and safe operation.  Without successfully completing adequate training you risk being non compliant with the Work at Height Regulations 2005.

Small Training Solutions are approved to issue our own certification, RTITB or NPORS Accredited certification, both options will provide proof of training, all certification is backed up with your record of training archived on our secure system.  

RIDDOR statistics released before the Work at Height Regulations 2005 showed that 60% of falls recorded were “low falls” from below head height.

HSE statistics show that fatal injuries in the workplace have remained level in recent years and falls from height is still one of the biggest causes.

This course is designed for those personnel who is required to operate a static boom in the worplace.

  • Health and Safety at Work Act 1974
  • Management of the Health and Safety at Work Regulations
  • Provision and Use of Work Equipment Regulations 1998
  • Lifting Operations Lifting Equipment Regulations 1998
  • Working at Height Regulations 2005
  • What are the hazards
  • Risk Assessment and Safe System of Work
  • Correct selection of the harness and lanyard
  • Hierarchy of control measures while working at height
  • Rescue plans
  • Understanding the equipment used
  • Suspension Trauma
  • Site selection
  • Pre Use Check fo teh MEWP
  • Operation of the MEWP
  • Pre-Use Checks
  • Theoretical Examination
  • Practical Test of Basic Operating Procedures

A high proportion of theory and practical exercises, this is followed by a theory test, pre use test and practical test.

  • RTITB
  • NPORS (National Plant Operators Registration Scheme)
  • Small Training Solutions Certified

1B Static Boom Training Courses onsite:

Merthyr Tydfil, Pontypridd, Cardiff, Bridgend, Newport, Blackwood, Swansea, Llanelli, Llansamlett, Crosshands, Pembroke, Caerphilly, Carmerthen, Bristol, Brecon, Neath, South Wales, Wrexham, Llandielo, Aberdare, Mountian Ash, UK Wide

Why Small Training Solutions

Enquire Now